6 mm red mounting cable for solar cells / 10 m of the best quality. The cable intended for assembly and connection between solar panels to the inverter and further to any regulator and junction box and is a climate-resistant solar cable, adapted to demanding environments, the cable is double-insulated and does not dry out in the sun, nor does it crack in winter cold. The metal wires have been tinned to resist corrosion.

Specification 6 mm red cable
Type: H1Z2Z2-K
Spec: 1 x 6 mm2
Standard: EN 50618/IEC62930

Preferences
Construction mm2 84/0, 285
Material: Tinned copper
O.D/ (mm) 3.3 plus/minus 0.05

Insulation
Material: XLPO
Average thickness (mm) 0.7
O.D/ (mm) 4.7 plus/minus 0.05
Colour: Red

Electrical performance
Rated voltage: DC 1500V
Temperature range: -40 to 125 degrees
Dielectric strength: AC-6.5KV/1min
Spark test: AC-10KV/In air
Resistance: 3.39?Km
UV resistance: 720h
Lifetime approximately: 25 years

Sold in a minimum of 10 running meters, if you want 20 meters then press two in number (double number) when you check out, if you want 30 meters then press 3 in number and so on

Item number 122734