The Polux LED Closet Bar has a motion sensor that facilitates on and off through motion capture with a detection range less than 1.5 meters, the luminaire will turn off within 45 seconds After not perceiving movement, it can be installed in a 558 mm cabinet gap being accommodated in smaller spaces by cutting the bar. Its assembly consists of screwing the bar to the sides of the space where it is installed. The materials used are matt anodized aluminium and rubber to reduce the noise of the hangers. Allow 12V DC electricity input. Features:- Built-in motion sensor which allows to switch on the lighting when approaching less than 1,5 metres and that switch it off 45 seconds after having left the detecting range.- Power supply: 12V DC. A constant voltage LED driver is required for installation .- To be installed in wardrobes with an inner width between 408-558mm. The hanger rail can be cut to fit the wardrobe inner size.- Rail made of matt anodized aluminium with semi-rigid PVC rubber to avoid hangers noise.- Easy installation thanks to the lateral brackets and assembly screws supplied.- Energy efficiency class A.Specifications:- Sensor detecting range: 1,5 metres.- Sensor detecting angle: 90°.- LED quantity: 32.- Luminous flux: 125 lm.- Power: 2,6W.- Beam angle: 120°.- Protection class: IP20.- Format: 1 Unit- Size: A 558 mm- Dimensions (1 UN): 5 x 3,5 x 65- Weight: 0.31 Kg- Material: Plastic, Aluminium- Components: 1 wardrobe rail, 2 lateral supports, screws and assembly instructions