This 100 liter solar collector is specially designed for those of you who have your holiday home in the forest, in the countryside or perhaps out in the archipelago. This solution is a big advantage as it does not require any electricity but still works if there is access to sun and water. Imagine having access to hot water in the shower and or when doing the dishes, surely that's good? The solar collector tubes in the collector are very sensitive and actually work even when it is cloudy.

Another area of use

This solar collector also works great if you want to give your pool some extra heat. Here you can count with a simple rule of thumb: calculate a 100 liter solar collector tank per 10 cubic meters of water, so for example two connected 100 liter solar collectors like this are enough to heat a pool of 20 cubic meters of water.
 
The plant works like this

This 100 liter solar collector works in a direct flow of water without pressure, the solar heater is composed of direct flow collector and a non-pressurized tank. When you drain the hot water for, for example, the shower, cold water will be added to the tank at the same time, and automatically stopped when the tank is full. This way the tank will always stay full of water.

The heat collection tube is made as a vacuum tube and in this there is an aluminum fin. The sun's rays heat and are collected by the selective absorption coating on the fin. Via transmission to the conduit from the aluminum fin, the conduit will supply energy to the tank to gradually increase the water temperature of the entire tank.

Good to know

-The heating pipe delivers heat in a safe way,

-The solar collector can work at low temperature with fast speed and high efficiency.

-Because the heating pipe can work at a low temperature, the pipe is protected from frost and breakage.

-The heating pipe is not filled with water, which prevents pipe breakage

-The pipe can work at very low temperature because no water inside but cannot withstand prolonged frost

-The solar water heater can work well even if a pipe breaks

-The water tank is filled and stopped automatically, which means you never have to fill the water by hand.

Benefits

With high-quality auxiliary tank and automatic water supply.

Easy to mount for flat roofs and pitched roofs,

Auxiliary heating with electric heater.

High-pressure polyurethane foam with a thickness of 55 mm.

Stable and reliable performance, good wind resistance.

SUS304-2B inner tank and silicone seals.

High-strength galvanized steel bracket.

Ecological and economical, improves the environment and saves your fuel and electricity costs.

This model works to feed water automatically.

Using thermosiphon systems - depending on the density between solar heated water and cold water, a water flow cycle is created in the pipes. Hot water automatically flows upwards while cold water flows downwards. The water in the storage tank will be heated from this nautical circulation.

Model: SD-T-12

Number of pipes (pcs): 12

Water tank

Net capacity (L): 100

Gross capacity (L): 125

Material of inner tank (mm): SUS304

Material of outer tank: SUS304-2B/ Painted steel plate

Material insulation: Polyurethane

Vacuum tube

Diameter/Length (mm): ?58 / 1800

Material pipe: High borosilicate glass 3.3

Frame

2 feet (left-right)

Angle 45°

Object size

Width (mm) A 1310

Width at the bottom (mm) B 1110

Total height (mm) C 1700

From back edge to toe (mm) D 1430

Supplied with extra expansion vessel with article number 094754

Article number: 094604

NOTE. This solar collector is only intended to work in summer and at plus temperatures. If there is a risk of frost, the solar collector must be emptied of water, otherwise the heat reflectors will freeze to pieces