CERAMIC CEILING PAINT NAVY BLUE H0508 DEEP MATTE 10L

PROVEN POLISH BRAND

Dear Customers, our products are colored individually, according to your order, so we ask for thoughtful purchases!

_________________________________________________

MANUFACTURER: NIKKI

Capacity: 10L

Type: Ceramic Paint

Color: NAVY BLUE H0508

Coating appearance: Deep Matte

_________________________________________________

For colored paints, we recommend a wide selection of white paints:

Latex paint SUPER WHITE

Stain-resistant premium latex paint

Anti-reflective latex paint snow white

Ceramic paint SNOW WHITE

_________________________________________________

* To get to know the color in real life, you can order 4 color samples and try the color and coverage.

WARNINGThe color visible on your monitor may differ significantly from the actual color due to color reproduction technology, individual monitor settings on your side, and differences in lighting. Therefore, we recommend ordering a sample that reflects the actual color.

By ordering the product without ordering a sample first, you risk receiving a shade that will not fully meet your expectations.

_________________________________________________

Important: When buying products on this auction, you buy only the color NAVY BLUE H0508.

_________________________________________________

Other colors from the color chart are available on another auction.

ABOUT THE PRODUCT:

Interior paint with very good coverage for coloring on a polymer binder base, the highest quality covering pigments and selected snow-white marble powders. For use on walls and ceilings.

It is characterized by above-average resistance to scrubbing and repeated washing, which means that the resulting coatings do not absorb dirt and 'difficult' stains and are resistant to detergents. Ideal for application on concrete substrates, cement, lime, polymer and gypsum plasters, gypsum boards and other mineral surfaces.

Suitable for rooms with difficult operating conditions: conference rooms, public utility facilities, stairwells, dining rooms and other places exposed to intensive use, potential dirt and mechanical loads (rubbing).

Suitable for use in kitchens, bathrooms and other rooms.

_________________________________________________

Guaranteed coverage in two coats for every color;

Long-lasting effect of colored walls;

Does not splatter during painting;

The paint coating after drying has a deep matte structure, which eliminates light reflections causing the impression of uneven substrate;

Resistant to scrubbing, ceramic;

Application method: roller, flat brush, gun;

Directly from the manufacturer, produced on an ongoing basis.

_______________________________________________

In care for the safety of your shipments, all parcel orders are fulfilled in iron buckets with a clamping ring and in a durable rigid cardboard.

_______________________________________________

‼ WARNING ‼

Due to various substrates and properly refined processing technology, our paints have an extended drying time on the wall.

Therefore, it is necessary to wait at least 4 hours between paint applications, because shortening it results in worse coverage, and thus the need to repaint the wall. This is the most common mistake in painting, because when painting the next layer, the previous one, not yet set, softens and eventually mixes with the unset coating of the next layer. With such a painting mechanism, even after 4-5 layers, the paint will not effectively cover the substrate.

_________________________________________________

** Before painting, for surface preparation, we recommend using NIKKI primers. The primers are concentrated and require dilution with water in the ratio indicated on the label. Using primers not diluted according to the instructions on the package may result in poor coverage and lead to coating cracking!

Using primers from other manufacturers may lead to poor coverage and surface cracking.

In the set, we recommend the following primers:

Universal primer - before first painting of raw plasters

Deep penetrating primer - before painting on chalky substrate

Primer for paint - to improve efficiency and coverage

_______________________________________________

PAINT AVAILABLE IN CAPACITIES 2L, 5L AND 10L

ON THIS AUCTION YOU BUY 10L !

_________________________________________________

In care for the safety of your shipments, all parcel orders are fulfilled in iron buckets with a clamping ring and in a durable rigid cardboard.

_______________________________________________

APPLICATION:

⇨ for indoor use;

⇨ for application on walls and ceilings;

⇨ serves as a finishing layer;

⇨ for use on surfaces prone to contamination;

⇨ for application on properly prepared surfaces: concrete, gypsum plaster, thin-layer plaster, lime plaster, gypsum boards;

⇨ the paint can be tinted to one of 432 colors according to the color palette;

⇨ application - with roller, brush, spray.

_________________________________________________

TECHNICAL DATA:

• Packaging: 10L

• Application: spray, roller, brush

• Efficiency: 7m2/1L with one-time painting

• Recommended number of layers: 2

• Coating appearance: deep matte

• Drying time at temperature 20°C and humidity 60%:

- to touch: up to 2h

- for applying the second layer: 4-6 h

• Application temperature: from +10°C to +30°C

• Validity period from production date: 24 months

• Product meets requirements according to standard PN-EN 13300

• Resistance to scrubbing: class 1

_________________________________________________

STEP-BY-STEP APPLICATION:

STEP I – substrate preparation:

• substrates must be dry, clean, load-bearing and free from dirt, dust, grease stains, anti-adhesion agents after formwork and all substances reducing adhesion to the substrate and may cause discoloration on the surface of dried paint.

STEP II – priming:

• mix the primer before use. For dusty and sandy substrates, application with a brush is recommended. Before painting, it is recommended to dilute the primer with water in a 1:1 ratio. Apply the primer in one, even and continuous layer.

STEP III – product preparation:

• thoroughly mix the paint to obtain a homogeneous consistency. To obtain a thinner consistency, you can add a small amount of clean cold water - do not exceed a glass of water (0.25L) per 10-liter bucket. Do not aerate the paint during mixing by using too high mixer speeds.

• do not add any accelerators, retarders or other additives to the paint.

STEP IV – painting:

• paint inside rooms at ambient and substrate temperature from +10°C to +30°C.

• apply with a brush, roller or hydrodynamic spray 2 layers of paint – at intervals of about 4 h.

• apply carefully and evenly the same amount of paint per unit area of the wall or ceiling.

• the last stroke with a roller or brush should be done in one direction.

• the paint coating achieves full durability properties after 28 days from the completion of painting works.

_________________________________________________

ON THIS AUCTION YOU BUY COLOR: